Характеристики и описание
Mechanical values and environment | |
|---|---|
| Housing material | PA6-GF30 gray |
| Ambient temperature | -20 ... 70 °C |
| Degree of protection | IP67 in installed state (only access side) |
| Mounting method | On the front |
| Mounting cut-out according to DIN 43700 | 33 x 68 mm |
Electrical connection ratings | |
| LED indicator | |
| Green | Operational |
| Yellow | Key in operating distance |
| Red | Fault |
| Connection cross-section | 0,14 ... 1,5 mm? |
| Parameters for floating semiconductor switching contact LA | |
| Switching voltage | 0 ... 24 ... 30 V |
| Switching current | 1 ... 10 ... 50 mA Function description of the overload protection in the Electronic-Key adapter manual, order No. 110845 |
| Utilization category according to EN 60947-5-1 | |
| AC-15 | 24V 50mA |
| AC-12 | 24V 50mA |
| DC-12 | 24V 50mA |
| Utilization category according to EN 60947-5-2 | |
| DC-13 | 24V 50mA |
| Interface and signaling | |
| Switching voltage | UB-2 ... UB V |
| Switching current | 1 ... 10 ... 50 mA |
| Power supply | |
| Operating voltage DC | 9 ... 24 ... 28 V DC For use and operation as per the UL requirements, a power supply with the feature "for use in class 2 circuits" must be used. |
| Current consumption | max.70 mA |
Interface, bus | |
| Interface and signaling | |
| Data interface | 4-bit parallel plus strobe, binary coded via High/Low level |
Miscellaneous | |
| Parameters for floating semiconductor switching contact LA | |
| Additional feature | |
| Resistance in switched-on state in Ohm 35 | |
| Capacitive load on output in µFmax.1 | |
Mechanical values and environment
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
Или отправьте нам запрос на e-mail: zapros@filfar.by
Доставка
Оплата и гарантии