Характеристики и описание
Описание оборудования | |
|---|---|
| G10 ultra compact module 2 inputs and 1 output | |
General specifications | |
| Slave type | A/B slave |
| AS-Interface specification | V3.0 |
| Required master specification | ? V2.1 |
Indicators/operating means | |
| LED FAULT | error display; LED red red: communication error or address is 0 red flashing: overload of sensor power supply or overload of outputs or external auxiliary voltage UAUX missing |
| LED AS-i | AS-Interface voltage; LED green |
| LED IN | switching state (input); 2 LED yellow |
| LED OUT | Switching state (output); LED yellow |
Electrical specifications | |
| Auxiliary voltage | 20 ... 30 V DC PELV |
| Rated operating voltage | 18.5 ... 31.6 V from AS-Interface |
| Rated operating current | ? 40 mA / max. 60 mA |
| Protection class | III |
| Surge protection | UAUX, Uin: Over voltage category III, safe isolated power supplies (PELV) |
Input | |
| Number/Type | 2 inputs for 2- or 3-wire sensors (PNP), DC |
| Supply | from external auxiliary voltage UAUX |
| Voltage | 20 ... 30 V |
| Current loading capacity | ? 1000 mA overload and short-circuit resistant |
| Input current | ? 9 mA (limited internally) |
| Switching point | according to DIN EN 61131-2 (Type 2) |
| Signal delay | < 1 ms (input/AS-Interface) |
Output | |
| Number/Type | 1 electronic output, PNP, |
| Supply | from external auxiliary voltage UAUX |
| Voltage | ? (UAUX - 0.5 V) |
| Current loading capacity | ? 1000 mA overload and short-circuit resistant |
Directive conformity | |
| Electromagnetic compatibility | |
Standard conformity | |
| Degree of protection | EN60529:2000 |
| Fieldbus standard | EN62026-2:2013 |
| Input | EN 61131-2:2007 |
| Emitted interference | EN61000-6-4:2007/A1:2011 |
| AS-Interface | EN62026-2:2013 |
| Noise immunity | EN61000-6-2:2005, EN61326-1:2006, EN62026-2:2013 |
Programming instructions | |
| Profile | S-7.A.E |
| IO code | 7 |
| ID code | A |
| ID1 code | 7 |
| ID2 code | E |
| Data bits (function via AS-Interface) | input output |
| Parameter bits (programmable via AS-i) | function |
Ambient conditions | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
| Shock and impact resistance | 30 g, 11 ms in 6 spatial directions 3 shocks 10 g, 16 ms in 6 spatial directions 1000 shocks |
| Vibration resistance | 0.75 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles |
Mechanical specifications | |
| Degree of protection | housing: IP67 IP67 |
Описание оборудования
AS-Interface sensor/actuator module VBA-2E1A-G10-ZAL/E2L-1M-V1-Y
Под заказ
Цену уточняйте
Минск ∙
Доставка
Оплата и гарантии