Surge Protection Barrier K-LB-1.6G - фото 1 - id-p95222299

Характеристики и описание

- Производитель
  Cross

Описание оборудования
2-line protection
General specifications
Number of protected signal lines	2
Topology	grounded
Electrical specifications
Connection	protected area: terminals 7, 8 unprotected area: terminals 1, 2
Rated current	250 mA
Leakage current		Nominal voltage	1 V DC
Maximum continuous operating voltage	6 V DC
Series resistance	< 0.5 ? per line
Impulse rating	10 kV/5 kA (category C2) 2 kV/2 kA (category D1)
Impulse discharge current (10/350 µs)	2 kA per line (2x)
Nominal discharge current (8/20 µs)	5 kA per line (10x)
Rated surge current (8/20 µs)	10 kA per line (1x)
Total discharge current (8/20 µs)	20 kA (1x)
Voltage protection level	max. 90 V line-line for nominal discharge current I_n max. 25 V line-earth for nominal discharge current I_n
Impulse reset time	< 30 ms
Insertion loss	? 0.05 dB, at 0 ... 4 kHz, in 600 ?-System ? 3 dB, at 0 ... 174 kHz, in 100 ?-System
Indicators/settings
Labeling	space for labeling at the front
Conformity
Degree of protection	IEC 60529:2013
Surge protective devices for low voltage	EN 61643-21:2001+A1:2009+A2:2013 IEC 61643-21:2001+A1:2008+A2:2012
Operating conditions
Installation conditions
Ambient conditions
Ambient temperature	-30 ... 80 °C (-22 ... 176 °F) For usage in hazardous area observe EC-type examination certificate.
Relative humidity	5 ... 95 %
Mechanical specifications
Degree of protection	IP20
Connection	screw terminals
Core cross-section	2 x 2.5 mm²
Mass	approx. 100 g
Dimensions	12.5 x 115 x 110 mm (0.5 x 4.5 x 4.3 inch)
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-Type Examination Certificate	PTB 00 ATEX 2176 X
Certificate	PF 16 CERT 4065 X
Directive conformity
International approvals
CSA approval
IECEx approval